Changing the battery in a Kia key fob is a simple procedure. All you need is a new battery and flathead screwdriver. Next, open the casing of the key and insert the new battery. Make sure the lettering is facing up. Reattach the key fob to the car. The key fob will now work as usual. Replace the battery and lock the device.
To replace the battery, turn the key fob over on a flat surface. The battery should be inserted into a small hole in the opposite side of the key. Put a screwdriver in the slot on the inside of the fob and push it in until the battery pops out. If the key fob does not work, try replacing the battery with a new one.
To change the battery in a Kia key fob, you need to take the key fob apart and remove the old battery. The plastic casing will not hold the new one. Now, insert the new battery and replace the plastic casing. Be sure to press it in the right place to ensure that the battery is tightly attached. After that, place the screwdriver in the small slot on the opposite side of the key fob and remove the old battery.
Changing the battery in a Kia key fob may be difficult, but it is not impossible. It will only take a few minutes to complete, and you will be able to use your new key fob without any problems. If you do not have the right tools or know what you’re doing, you can contact a dealer or a Kia customer service center to get your fob repaired.
Once you’ve changed the battery in your Kia key fob, it’s time to reinstall it. Then, you’ll be able to access your key fob again and enjoy your new, updated car. You’ll need the right tool for this. You can get a slim screwdriver to remove the battery. A screwdriver should be inserted into the small slot at the opposite end of the key.
If your Kia key fob fails to work after a battery change, it’s important to check the orientation of the battery before reattaching the back cover. After replacing the battery, the key fob should now work as expected. Nonetheless, if the fob is still not working after the battery has been replaced, you can try to find a replacement from a reputable dealer.
A new battery in a Kia key fob will keep the device functioning properly, but the battery in your key fob should last for several years. If you’re not sure how to replace it, call your Kia dealer. Afterwards, follow the steps in reverse order to ensure that your keyfob continues to work. You’ll need a screwdriver and a few minutes to change the battery.
If your Kia key fob fails to work after a battery change, the reason could be that the battery is flat or it is not installed properly. Once you’ve done the job, your Kia key fob will be working again. The instructions in this article apply to the Optima, Forte, Rio, Sedona, Soul, and other models of Kia. If your keyfob doesn’t work after a battery change, you can take it to your dealership for a replacement.
A Kia key fob will not work if the battery is flat. It can’t be charged if the battery is not in the right position. To replace the batteries, lay the key fob upside down on the floor. Locate the tiny hole on the opposite side of the key. Carefully insert a flathead screwdriver into the hole and squeeze the casing until the shell comes off.