How to Fix a Leaking Tiled Balcony

If your tiled balcony is leaking, you must be aware of what causes it. Surface breaks can cause water to seep through the balcony and erode its structure. You can prevent this problem by replacing cracked tiles and grout, or by hiring a professional to replace them and apply a sealer. If you don’t have the necessary skills, you can hire a tiler to repair the damaged tiles and grout, or to simply seal the balcony’s surface with a suitable product.

If the water is soaking the tiles, the problem is most likely caused by the grout between the tiles and the waterproofing membrane. Water may also get into the substrate due to structural movements, which may cause shifting. A leaky tiled balcony can lead to serious damage and may need to be replaced. If the damage is serious, you may need to replace the entire balcony or install a waterproof membrane over the concrete.

In some cases, it may be necessary to replace the balcony’s floor. The membrane could be failing, which could cause cracked tiles. In this case, you can replace them or waterproof them with a penetrating sealer. Other cases may involve tiles that have cracked or rotted. When this happens, it can be difficult to determine the root cause of the problem. If you’re unsure, hire a specialist to check the damage.

The main cost of repair is the replacement and installation of tiles and membrane. There are better options than replacing a leaking tiled balcony. One of the most effective methods is to use a Shower Plug to waterproof the balcony without removing the tiles. This is a great option because it doesn’t require the tile removal. And it’s ready in just 12 hours. Spray, brush, or roller are all used to apply the Shower Plug. The shower plug will dry after the second coat is applied.

Another solution to the problem is to use a waterproofing membrane. A waterproofing membrane is a thin sheet that covers the floor and wall to prevent water from seeping into the structure. These membranes are made of bitumen, rubber, and polymers. Their lifespan ranges from five to 10 years. You should use the right material to waterproof your balcony.

If you do not have a waterproofing membrane, you should consider installing a waterproofing system. If it’s not installed properly, you may find that the water penetrates the membrane, which will allow the leaks to form. You can also install tiles with epoxy grout. You should also check for cracks in the tiles, since a cracked tile will make the entire structure prone to water leaks.