How to Insert SIM Card in Infinix Hot 7 Pro

If you are unable to insert a SIM card into your Infinix phone, then this article is for you. There are many solutions. If you’re still having trouble, there are some helpful tips. Activate airplane mode on your Infinix phone. This will help you to find out if the fault is with the sim or the phone.

First, open the SIM card drawer. It is normally located on the side of your smartphone. You can open the hatch by using a SIM extraction tool. Make sure to hold the SIM card perpendicular to the hole and be gentle throughout the entire process. After removing the SIM card, you will need to carefully slide it into the SIM slot. Make sure to use the correct direction and size of the SIM card as it is very easy to make it fall into the wrong spot.

Next, you should remove the SIM card. To do this, slide the SIM card drawer in the opposite direction to the way you inserted it. The Settings menu will open and you can tap the Connections section. Here, you will see a section called SIM card management. Find the SIM card drawer. The SIM card will be on the left side. Once the SIM card has been removed, slide it back into the phone.

After you have removed the SIM tray, insert the SIM card into the SIM slot. It is important to not force the SIM card tray into the slot. This could cause damage to the phone. After you have completed this, switch off aeroplane mode. Wait for the network to load. If it doesn’t, replace the SIM card tray. Then, you’re ready to use your INFINIX Hot 7 Pro. You can also use the SIM card on another device, but make sure you don’t reach it while removing the tray.

If the SIM tray is not available, you can use a trombone. A trombone is a great tool to open the SIM slot in the Infinix Hot 7. The trombone is the perfect size and is easily available, although it may be a bit thick. A thumbtack, a staple used to hang posters, can also be used. This method has one problem: the thumbtack can scratch the hatch.

Once you have removed the SIM card, you can proceed to insert the SIM card. To do this, you will need a small metallic paper clip or ejector pin. Place the pin into the SIM card tray, and push it through the hole. The SIM card tray should pop out a little bit, and you can now insert the SIM card. If the SIM card is not inserted, you will need the tray to be removed.