How To Repair A Cracked Golf Cart Body

How to Repair a Cracked Golf Cart Body

There are many ways to fix a cracked cart body. For fiberglass bodies, it can take up to a day to complete the process. First, clean the body using a strong detergent or window cleaner. Next, apply a layer sealant. Once the sealant has dried you can paint your cart. You must allow the entire cart to dry for at minimum one day before you can paint it. If you are working on a plastic body, you can use plastic bags to cover the damaged area.

Cleaning the crack is the first step to repairing a cracked fiberglass cart body. After cleaning, you must use a sandpaper to smooth the area and allow the epoxy to set. An orbital sander can be used to repair larger cracks. To clean the fiberglass, you need to make sure the crack is free from dust and dirt. The resin won’t stick to the cracks if it isn’t. To apply epoxy resin to the repaired area, use a plastic applicator.

A new battery is another simple way to repair a damaged golf cart body. A fresh battery will make the cart run smoother. First, you should check the battery cables and make sure they are not loose or corroded. If necessary, you can clean the battery case with a wire brush. Make sure you check your tire pressure. If it is too low, you can use a screwdriver to ream out the old batteries. Lastly, you can take the battery to a mechanic if you are not comfortable doing the job.

Next, replace the rear wheel. If the rear wheel is completely broken, the wheels must be replaced. Flat tires can be fixed with an electric air pump. Another common golf cart problem involves the accelerator. In addition to the brake, you should also check the clutch and accelerator mechanism. The accelerator lever is often faulty and should be replaced. You may need a socket wrench to fix this issue.

Before painting, you should make sure that the area is well ventilated. You need to wear protective gear to avoid breathing paint fumes and wind. You must also protect yourself against paint drips. Protective eyewear and disposable gloves are recommended. To prevent paint damage, cover the area with plastic bags if it is exposed to the sun. It is also essential to follow the manufacturer’s recommendations about drying time.

Leave a Reply

Your email address will not be published.